Eigenschaften

• CAN 2 .0A and CAN 2.0B supported
  
• Two independent CAN communication ports
  
• CAN transfer rate up to 1 Mbps
  
• 2 KV optical isolation protection
  
• LED for transmit/receive status on each port
  
• Optional 120 ohm terminal resistor for CAN bus network
  
• DLL library and examples included
  
• Windows driver provided

Beschreibung

Moxa’s new CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a stand-alone CAN controller, the CP-602U-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP- 602U-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602U-I-T only) and 2 KV isolation make the boards suitable for use in harsh industrial environments.

Weitere Informationen

Ordering Information
CP-602U-I:	2-port CAN interface Universal PCI board, with 2 KV isolation protection, 0 to 55°C operating temperature
CP-602U-I-T:	2-port CAN interface Universal PCI board with 2 KV optical isolation protection, -40 to 85°C operating temperature