Eigenschaften

• Low RMA rate and high reliability with Sunix’s single chipset designed ASIC
  
• Compliance with PCI ver. 2.2 spec. standard
  
• Supports both 64-bit & 32-bit PCI bus slot and 3.3V & 5V power
  
• Industrial grade design for stability and reliability
  
• 128K FIFO buffer can reduce CPU loading, less interruption and improving system performance dramatically
  
• Plug-n-Play, I/O address and IRQ assigned by BIOS
  
• RS-232 industrial host controller series are certified by WHQL, CE, FCC approval
  
• Support Microsoft Windows, Linux, and DOS

Beschreibung

Sunix universal PCI Multi-port serial card provides RS-232 Serial and Parallel connection ports on your system for industrial communication and automation applications. The 4079 card works on both 32-bit and 64-bit PCI Bus with 3.3V or 5V power, allowing this multi-port serial card to be installed in virtually any PC system and compatible with all major operating systems. The card supports multi independent RS-232 ports, with each port transfer data up to 921.6 Kbps and the parallel ports offers speed up to 2.7 MB/sec. Sunix universal PCI Multi-port serial cards is the best solution for various industrial communication and automation applications.

Weitere Informationen

Sunix’s 4079D card also has a special function built-in. The function, which is developed and registered by Sunix, is called Re-Map. This feature is made for use with devices which designed to work only in specific address like the COM1 or COM2 port. The Re-Map function allows user to manually adjust the I/O address to the following specific address 3F8, 3E8, 2F8, and 2E8.

Sunix’s 4079P card is specially designed to allow power output from the ninth pin of the connector to enable power up of the connected devices without power adapter. The card allow user to set each individual port with 5V, 12V, or RI (no power). User can also choose to draw the needed power from the system PCI bus or the external system power supply. Each of the connected has a built-in circuit protection to prevent damage from excessive current and short circuit of the connected devices.

Function

Type	Multi I/O Universal PCI card
Mode of Operation	Serial: Handshaking  Parallel: ECP / EPP / SPP / BPP
Bus Transceiver	RS-232 Full-Duplex
Driver per Line	1 Driver
Receiver per Line	1 Receiver

Hardware

Host Controller	SUN1889 UART (16C650 compatible)  SUN1689 (IEEE1284C compatible)
Bus Interface	32-bit / 64-bit Universal PCI  3.3V / 5V bus power
PCB Connector	A model: DB9M connector, dual line 13-pin Header  AL model: DB44F connector  R model: DB62F connector
Number of Port	2 x RS-232  1 x Parallel
Dimensions (WxD)	A model: 120 x 74 mm  AL model: 120 x 64 mm  R model: 120 x 78 mm
Bracket	Standard 121 mm  Low Profile 79.2 mm

Communication

IRQ & I/O Address	BIOS assigned
FIFO	32 byte on-board FIFO  128K byte assigned FIFO
Baud Rate	RS-232: Up to 921.6 Kbps  Parallel: 2.7 MB/s
Data Bits	4, 5, 6, 7, 8
Stop Bits	1, 1.5, 2
Parity	None, Odd, Even, Space, Mark
Flow Control	None, Xon/Xoff, RTS/CTS
Data Signal	Tx, Rx, RTS, CTS, DTR, DSR, DCD, RI, GND

OS Support

64-bit System	Intel Itanium and AMD Athlon 64 64-bit CPU System
Microsoft	Win 9x/ME/NT, Win 2K/XP/2003, Win CE
Linux	2.0.x / 2.2.x / 2.4.x / 2.6.x
DOS	DOS

Regulatory Approvals

Hardware	CE, FCC (Class B)
Driver	WHQL

Package Content

Product	Sunix 4079 PCI Card
Cable	A model: 2x13-pin Header to 1*DB25F  AL model: DB44M to 2*DB9M + 1*DB25F  D model: 2x5-pin Header to DB25M
CD	Sunix software & driver CD
Manual	Sunix user manual

Available Model

4079A / AL	2 ports RS-232 + 1 port Parallel  Universal PCI Card
4079D	2 ports RS-232 + 1 port Parallel Universal PCI Card with Re-map function
4079P / PL	2 ports RS-232 + 1 port Parallel Power Port Universal PCI Card