MOXA CP-116E-A
16-port RS-232/422/485 PCI Express board with 4 kV surge protection
- PCI Express x1 compliant
- Serial communication speed up to 921.6 Kbps
- 128-byte FIFO and on-chip H/W, S/W flow control
- Variety of connection cables and boxes available for RS-232/422/485
- Drivers provided for the latest versions of Windows, Linux, and Unix
- Easy maintenance with on-board LED display and management software
- 15 kV ESD and 4kV surge protection onboard
Das Modell CP-116E-A ist ein intelligentes serielles PCI Express-Multiport-Board für POS- und ATM-Anwendungen sowie für Anwendungen von Industrieautomationssystem-Herstellern und Systemintegratoren.
Das Modell CP-116E-A ist mit allen gängigen Betriebssystemen kompatibel.
Jeder seiner 8 seriellen Ports unterstützt Datenraten von bis zu 921,6 kbps und liefert zudem alle Modem-Steuersignale, so dass die Kompatibilität mit einer Vielzahl von seriellen Peripheriegeräten gewährleistet ist. Darüber hinaus arbeitet das Board CP-116E-A nach dem Standard PCI Express x1 und kann somit in jedem beliebigen PCI Express-Steckplatz installiert werden.
Jeder seiner 8 seriellen Ports unterstützt Datenraten von bis zu 921,6 kbps und liefert zudem alle Modem-Steuersignale, so dass die Kompatibilität mit einer Vielzahl von seriellen Peripheriegeräten gewährleistet ist. Darüber hinaus arbeitet das Board CP-116E-A nach dem Standard PCI Express x1 und kann somit in jedem beliebigen PCI Express-Steckplatz installiert werden.
Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)
Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.
Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.
- Hardware
- 16C550C compatible
- PCI Express x1
- Serial Interface
- 16
- RS-232/422/485
- 4
- Serial Line Protection
- 15 KV on the board
- 4 kV
- Performance
- 50 bps to 921.6 Kbps
- Serial Communication Parameters
- 5, 6, 7, 8
- 1, 1.5, 2
- None, Even, Odd, Space, Mark
- RTS/CTS, XON/XOFF
- Serial Signals
- TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
- TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
- Data+(B), Data-(A), GND
- Operating Systems
- Windows 2000/XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)
- QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64)
- Linux 2.4.x, 2.6.x, 3.x
- Please refer to Moxa´s website for the latest driver support information.
- Physical Characteristics
- 97.9 x 88.9 mm (3.86 x 3.50 in)
- Environmental Limits
- 0 to 55°C (32 to 131°F)
- -20 to 85°C (-4 to 185°F)
- 5 to 95% (non-condensing)
- Up to 2000 m
- Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
- Standards and Certifications
- CE, FCC
- EN 55022, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class B
- EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 (DIPS)
- RoHS, CRoHS, WEEE
- MTBF (mean time between failures)
- 310,993 hrs
- Telcordia (Bellcore), GB
- Power Requirements
- 2,733 mA @ 3.3 V
Comm. Controller
Bus
Number of Ports
Serial Standards
Max. No. of Boards per PC
ESD Protection
Surge Protection
Baudrate
Data Bits
Stop Bits
Parity
Flow Control
RS-232
RS-422
RS-485-4w
RS-485-2w
Windows Real COM Drivers
Fixed TTY Drivers
Linux Real TTY Drivers
Note
Dimensions
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Altitude
Note
EMC
EMI
EMS
Green Product
Time
Database
Power Consumption
Kunden, die diesen Artikel gesehen haben, sahen auch