HW group PowerEgg2

PowerEgg2 combines two functions in one device -power Detector & Control. Detector indicate failures of electricity supply (110/230V, single phase) by relay output. Power Control can switch Off/On power supply output 8A, it´s controlled with a low voltage input. The PowerEgg can be connected to any device with digital inputs (DI) and digital outputs (DO).

PowerEggPowerEgg2 is a "pass-through mains outlet" with two IEC-320 connectors – a plug (C14) at the input, and a socket (C13) at the output.

PowerEgg2 combines two functions in a single device

• DETECTOR:
  Detects the presence of mains voltage at the input (indication with a change-over contact)
  
  
• CONTROL:
  Disconnects the output voltage (control with external DC voltage or a contact)

Applications

• Detection of power supply on the input, Switch off output voltage
• Alarm activation upon supply voltage / phase failure
• Voltage monitoring at UPS input/output
• Remote server restart
• Switching on additional cooling or ventilation
• Partial disconnection of the load when running on battery power

Specifications

Input voltage:
110V to 250V AC –IEC-320 C14

Power output current:
max. 8A –IEC-320 C13

Output control:
Application of external voltage to the “CONTROL” input


• 3–12V –control voltage input:
  voltage range 3V (5 mA) to 12V (20mA)
  
• DRY –external contact connection:
  <100Ohm / max 3mA
  
• Output control logic:
  Application of external voltage disconnects the output
  
• Output state when control voltage applied:
  Power circuit is interrupted


Input voltage detection:
Double-throw relay contact


• Input voltage presence indication:
  Relay activated (NO connected to COM)
• Detector relay parameters:
  120V / 0,5A AC, 60V / 0,3A DC, 24V / 1A DC


Operational/storage temperature:
-20°C to 80°C

Dimensions:
125 x 55 x 40mm

Ordering

PowerEgg2


Detects external AC voltage, controlled AC output