Advantech WISE-4671

Introduction

NB-IoT and LTE Cat M1 are new wireless technologies included in the 5G evolution of cellular technology standards defined by the 3rd Generation Partnership Project (3GPP). NB-IoT and LTE Cat M1 feature low power consumption and utilize LTE networks based on licensed spectrum bands. These technologies are optimized for connectivity to machines, assets and sensors in order to enable IoT applications such as smart cities, smart agriculture and remote asset management.

WISE-4671 series is a cellular based IoT wireless sensor node compliant with LTE Cat. NB1 and Cat. M1 with external for flexible installation. In addition to offering various I/O types, WISE-4671 series provides a data logger and direct cloud connectivity so that data can be published to the cloud by messaging protocol such as MQTT, CoAP, LwM2M with secure socket supported.


Features

Automatic Connection with Cloud

By utilizing leading IoT messaging protocols such as MQTT and CoAP, WISE-4671 series easily integrates with popular cloud services, reducing setup complexity and accelerating implementation.


Open Connectivity for Cloud and System

WISE-4671 series support CoAP and MQTT communication protocols while continually integrating mainstream cloud services to simplify the complexity of data integration.


Legacy and Existing Devices to NB-IoT/LTE-M

WISE-4671 series offer digital I/O, 4~20-mA analog and RS-232/485 interfaces for various applications, quickly providing NB-IoT/LTE-M network functions to existing devices and assets.


Upgrade Legacy Equipment though Cloud Management

WISE-4671 series NB-IoT/LTE-M sensor nodes are suitable for data collection from widely distributed assets. No complicated programming, setup, or registration are required for a fast introduction into IoT applications such as smart cities, smart water/electricity meters, and remote facility management.


Device to Cloud System Architecture

WISE-4671 series wireless sensor nodes support the open communication protocols MQTT, CoAP, and LwM2M. Users can transmit data to specific public cloud services or existing private cloud platforms by publish/subscribe or push.

Specification

Wireless Communication


3GPP Standards
R.13, Cat. NB1/ Cat. M1

Frequency Band
B2, B3, B4, B8, B12, B13, B20, B28

Antenna
Type External



GPS


GNSS Systems
GPS, GLONASS, Galileo, BeiDou and QZSS signals

Max. Update Rate
Every 15 seconds

Accuracy Position:
2.5 m Typ.

Acquisition
Cold starts: 31s Typ.

Antenna
Type Internal



General


Power Input
- Built-in 4100mAh Lithium rechargeable battery pack 10~50VDC
- external power - 17-21VDC Solar Panel

Power Consumption
Non-battery Charging: 1.4W @ 12VDC
When Battery Charging: 11W @ 24VDC

Configuration Interface
Micro-B USB

SIM
4FF/Nano SIM

Connector
Power: M12 4-pin code-A male x 1
I/O: M12 8-pin code-A female x 2

LED Indicator
Status, Error, Tx, Rx, Signal Level, Battery Level

Mounting
DIN 35 rail, wall, and pole

Dimension (W x H x D)
82 x 122 x 49 mm (without antenna)

Certification
CE, FCC, PTCRB, AT&T, Verizon



Operating Temperature


With rechargeable battery
0 ~ 60 °C (32 ~ 140 °F)

Without battery
-25 ~ 70 °C (-13 ~ 158 °F)



Storage Temperature


With rechargeable battery
-20 ~ 60 °C (-4 ~ 140 °F)

Without battery
-40 ~ 85 °C (-40 ~ 185 °F)

Operating Humidity
5 ~ 95% RH (non-condensing)

Storage Humidity
0 ~ 95% RH (non-condensing)

WISE-S614(4AI/4DI)

Analog Input


Channels
4

Resolution
16-bit

Sampling Rate
1Hz per channel

Accuracy
±0.1% of FSR (Voltage)
±0.2% of FSR (Current)

Input Range
±150mV, ±500mV, ±1 V, ±5V, ±10V, 0 ~ 150mV,
0 ~ 500mV, 0 ~ 1V, 0 ~ 5V, 0 ~ 10V, 0 ~ 20mA,
4 ~ 20mA , ±20mA

Input Impedance
> 2M Ù (Voltage)
240 Ù (External resistor for current)

Isolation Voltage
2000 VDC

Common Mode Voltage
350 VDC

Drift
Unipolar ±100ppm
Bipolar ±50ppm

Burn-out Detection
Yes (4~20mA only)

Supports Data Scaling and Averaging



Digital Input


Channels
4

Input Type
Dry Contact (Wet Contact by request)

Logic Level
0: Open
1: Close to DI COM

Supports 200Hz Counter Input (32-bit + 1-bit overflow)

Keep/Discard Counter Value when Power-off

Supports Inverted DI Status

WISE-S617 (2AI/2DI/1DO/1RS-485)

Digital Input


Channel
2

Logic Level (Dry Contact)
0: Open
1: Close to DI COM

Non-isolation

Supports 32-bit counter input function
(maximum signal frequency: 200 Hz)

Supports keep/discard counter value when power OFF

Supports frequency input function (maximum signal frequency: 200 Hz)

Supports inverted digital input status



Analog Input


Channels
2

Resolution
16 bit

Sampling Rate
1 Hz per channel

Accuracy
±0.1% of FSR (Voltage)
±0.2% of FSR (Current)

Input Range
±1 V, ±5V, ±10V, 0 ~ 1V, 0 ~ 5V, 0 ~ 10V, 0 ~ 20mA, 4 ~ 20mA, ±20mA

Input Impedance
> 2M Ù (Voltage)
120 Ù (External Resistor for Current)

Isolation Voltage
2000 VRMS

Common Mode Voltage
350 VDC

Drift
Unipolar ±100ppm
Bipolar ±50ppm

Burn-Out Detection
Yes (4 ~ 20mA only)

Supports data scaling and averaging



Digital Output


Channel
1 (Sink Type)

Non-isolation

Output Current
100mA



COM Port


Port Type
RS-485

Baud Rate (bps)
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Data Bits
7, 8

Stop Bits
1, 2

Parity
None, Odd, Even

Flow Control
Auto flow control

Signals
DATA+ and DATA-

Protection
15 kV ESD

Supported Protocols
Modbus/RTU (Up to 32 addresses with a maximum of 8 instructions)

WISE-S672 (6DI/1RS-485/1RS-485 or RS-232)

COM Port


Port Number
2

Type
COM1: RS-485
COM1: RS-485/232

Serial Signal
RS-485: DATA+, DATA-
RS-232: Tx, Rx, GND

Data Bits
7, 8

Stop Bits
1, 2

Parity
None, Odd, Even

Baud Rate (bps)
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 Protection 15 kV ESD

Protocol
Modbus/RTU (Total 32 address)



Digital Input


Channels
6

Input Type
Dry Contact

Logic Level
0: Open
1: Close to DI COM

Supports 200Hz Counter Input (32-bit + 1-bit overflow)

Keep/Discard Counter Value when Power-off

Supports Inverted DI Status

Ordering Information

Advanced Industrial Cat. NB1/Cat. M1 Module
WISE-4671-UA	Advanced Industrial Cat. NB1/ Cat. M1 Wireless Module
WISE-S600 IP65 I/O Module with M12 Connectors
WISE-S614-A	4AI/4DI
WISE-S615-A	4RTD
WISE-S617-A	2AI/2DI/1DO/1RS-485 w/ 2ch 12VDC power output
WISE-S672-A	6DI/1RS-485/1RS-485 or RS-232
WISE-S600T I/O Module with Terminal Block
WISE-S614T-A	4AI/4DI
WISE-S615T-A	4RTD
WISE-S617T-A	2AI/2DI/1DO/1RS-485 w/ 2ch 12VDC power output
Accessories
1654011516-01	M12, A-code, 8 Pin, Male
1655005903-01	M12, A-code, 4 Pin, Female
1700028162-01	M12, A-code, 4 pin, Female with 1M cable
1700028163-01	M12, A-code, 8 Pin, Male with 1M cable
PWR-242-AE	DIN Rail Power Supply (2.1A Output Current)
PWR-243-AE	Panel Mount Power Supply (3A Output Current)
PWR-244-AE	Panel Mount Power Supply (4.2A Output Current)