Logo

MOXA NPort Z2150 / Z3150 Series

SPHINX in Europa »  ch es uk it at dk fr nl be be  «
Tel: +49 (0) 6201 75437 |  Login |  Impressum |  Kontakt |  English version
     

Sie sind hier » MOXA NPort Z2150 / Z3150 Series «

MOXA NPort Z2150 / Z3150 Series

prodgraf


1-port RS232/422/485 to ZigBee converter or ZigBee-to-Ethernet gateway



Eigenschaften


Beschreibung

Der NPort Z2150 ist zu IEEE 802.15.4/ ZigBee-konform und stellt eine betriebssichere funkgestützte Lösung für seriell-zu-ZigBee-Netzwerke dar, die mit einem Minimum an Verkabelung auskommt. Der NPort Z2150 kann als ZigBee-Koordinator (ZC), ZigBee-Router (ZR) oder ZigBee-Endgerät (ZED) konfiguriert werden. Jedes beliebiges serielle Gerät kann an den NPort Z2150 angeschlossen werden und Daten über PAN austauschen.

Ein benutzerfreundliches Hilfsprogramm zur Konfiguration von Gerätetyp und Netzwerkeinstellungen in einfachen Schritten steht zur Verfügung. Die folgende Abbildung zeigt eine typische Topologie eines ZigBee-Netzwerks.




ProdGrafik

Weitere Informationen

Surge-protected Serial and Power Lines

Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort Z2150/Z3150’s serial and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This surge protection provides a robust solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.


ZigBee Interface

RF Standard:
802.15.4/ZigBee compliant

Frequency Band:
2.4 GHz

RF Data Rate:
250 kbps

Rx sensitivity:
-96 dBm

Tx Power:
4.5 dBm (Max)

Transmission Distance:
Up tp 100m (open space)

Antenna:
2dBi

RF Channel:
16 channels

Device Type:
Coordinator, Router (NPort Z2150 only), End Device (NPort Z2150 only)

Network Topology:
Star, Mesh, Cluster tree

Security:
128-bit AES encryption algorithms


Ethernet Interface (NPort Z3150 only)

Number of Ports:
1

Speed:
10/100 Mbps, auto MDI/MDIX

Connector:
RJ45

Magnetic Isolation Protection:
1.5 kV built-in



Hardware

DIP Switch:
Console/Operation Mode

SW1:
Pull high/low resister, Termination for RS-422/485.

Reset Button:
Reset to default



Serial Interface

Number of Ports:
1

Serial Standards:
RS-232/422/485

Connector:
DB9 male

S-485 Data Direction Control:
ADDC (Automatic Data Direction Control)

Serial Line Protection:
1 kV surge protection



Serial Communication Parameters

Data Bits:
NPort Z2150: 8
NPort Z3150: 5, 6, 7, 8

Stop Bits:
1, 2

Parity:
NPort Z2150: None, Even, Odd
NPort Z3150: None, Even, Odd, Mark, Space

Flow Control:
NPort Z2150: RTS/CTS
NPort Z3150: RTS/CTS, XON/XOFF

Baudrate:
NPort 2150: 50 bps to 230.4 kbps
NPort 3150: 50 bps to 921.6 kbps



Serial Signals

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422:
TxD+, TxD-, RxD+, RxD-, GND

RS-485-4w:
TxD+, TxD-, RxD+, RxD-, GND

RS-485-2w:
Data+, Data-, GND



Software

Windows Real COM Drivers:
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

Configuration:
NPort Z2150: ZigBee Configuration Utility
NPort Z3150: Web Console

Firmware Upgrade:
NPort Z2150: ZigBee Configuration Utility
NPort Z3150: Windows Utility, Web Console



Physical Characteristics

Housing:
Aluminum

Weight:
NPort Z2150: 340g
NPort Z3150: 780g

Dimensions:
NPort Z2150:
Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
NPort Z3150:
Without ears: 77 x 111 x 26 mm (3.33 x 4.37 x 1.02 in)
With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)



Environmental Limits

Operating Temperature:
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature:
-40 to 75°C (-40 to 167°F)

Ambient Relative Humidity:
5 to 95% RH

Altitude:
Up to 2000 m

Note: Please contact us if you require products guaranteed to function properly at higher altitudes.



Power Requirements

Input Voltage:
12 to 48 VDC

Power Consumption:
NPort Z2150: 45mA@12V
NPort Z3150: 120mA@12V
Connector:
Power Jack with Screw, Terminal block (NPort Z3150 only)



Standards and Certifications

Safety:
UL (UL60950-1), LVD (EN60950-1)

EMC:
CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A



Reliability

Automatic Reboot Trigger:
Built-in WDT (watchdog timer)

MTBF (mean time between failures):
Over 20 years




Ordering Information
Available Models
NPort Z2150 1-port RS-232/422/485 serial to ZigBee converter with 802.15.4, 0 to 55°C operating temperature
NPort Z2150-T 1-port RS-232/422/485 serial to ZigBee converter with 802.15.4, -40 to 75°C operating temperature
NPort Z3150 1-port ZigBee to Ethernet gateway, 0 to 55°C operating temperature
Optional Accessories
  • Power Adaptors
PWR-12150-UK-SA-T 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, UK plug
PWR-12150-CN-SA-T 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, CN Plug
PWR-12150-AU-SA-T 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, AU plug
PWR-12150-USJP-SA-T 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, US/JP plug
PWR-12150-EU-SA-T 12V1.5A, -40 to 75°C operating temperature, Screw type AC power jack, EU plug



PDF

Dokumentation PDF MOXA NPort Z2150 / Z3150 Series Datasheet (1195.1 kB)



Copyright © 2013 SPHINX Computer Vertriebs-GmbH

Nach oben AGBDatenschutzerklärungKontaktCookie DirectiveStandorteÜber SPHINX Computer