Supports 1-port 100 Mbps single strand fi ber optics
Supports 10 ~30 VDC power input
Easily to mounted on a DIN-rail, panel or piggyback
Provides 100Base-FX WDM single strand fi ber
Supports MDI/MDIX auto crossover.
Embedded with a switch controller, supports auto-negotiation.
Embedded with the memory buffer, supports store and forward transmission.
The Advantech ADAM-6542 adopts WDM technology that increases the information carrying capacity of fiber via multiplex transmit and receive signals at different wavelengths on the single strand cable. The WDM technology is implemented in couples. One site is installed ADAM-6542/W15 which transmit channel is 1550nm and receive channel is 1310nm. The other site is installed ADAM6542/W13 which transmit channel is 1310nm and receive channel is 1550nm. Both transmit and receive channels of ADAM-6542/W15 and ADAM-6542/W13 are multiplexed to a single strand cable. You can save half cabling cost when you use ADAM-6542/W15 and ADAM-6542/W13 instead of your original dual fiber converter.
Standard IEEE 802.3, 802.3u, 802.3x
LAN 10/100Base-TX, 100Base-FX
Transmission Distance Ethernet : Up to 100 m Fiber: Up to 20 km
Transmission Speed Up to 100 Mbps
Connectors 1 x RJ-45 1 x SC type fiber connector 2-pin removable screw terminal (power)
LED Indicators Power, Link (100Base-FX), 100/10 M (Ethernet)
Power Consumption Max. 3 W
Power Input 1 x Unregulated 10 ~ 30 V DC
Dimensions (W x H x D) 70 x 112 x 27 mm
Enclosure IP30, ABS+PC with solid mounting kits
Mounting DIN 35 rail, Wall, Stack
ESD (Ethernet) 4,000 V DC
Isolation (Ethernet) 1,500 V rms
Surge (EFT for power) 3,000 V DC
Operating Temperature 0 ~ 60° C (32 ~ 140° F) Stack : 0 ~ 55° C (32 ~ 131° F)
Storage Temperature -10 ~ 70° C (-14 ~ 158° F)
Operating Humidity 20 ~ 95% (non-condensing)
Storage Humidity 0 ~ 95% (non-condensing)
MTBF 550,000 hrs
Safety UL 60950-1, CAN/CSA-C22.2 No.60950
EMC U.S.A.: FCC Part 15 CISPR 22 EU: EN55011, EN61000-6-4 EN55022 Class A, EN61000-3-2/3 EN55024 IEC61000-4-2/3/4/5/6/8/11 EN61000-6-2
Ethernet to WDM Single Strand Fiber Optic Converter (Tx : 1550 nm, Rx : 1310 nm)
Ethernet to WDM Single Strand Fiber Optic Converter (Tx : 1310 nm, Rx : 1550 nm