MOXA IA260
Product is End of Life : 2020-06-02
RISC-based fanless embedded computers with 4 serial ports, dual LANs, VGA, DIO, CompactFlash, USB
- Cirrus Logic EP9315 ARM9 CPU, 200 MHz
- 128 MB RAM on-board, 32 MB flash disk
- 4 software-selectable RS-232/422/485 serial ports
- VGA interface for field site monitoring
- Dual 10/100 Mbps Ethernet for network redundancy
- 8+8 DI/DO channels, up to 30 VDC
- 12 to 48 VDC power input design
- Supports CompactFlash and USB 2.0 hosts
- Ready-to-run WinCE 6.0 platform
- -40 to 75°C wide temperature models available
Der Embedded Computer IA260 verfügt über vier serielle RS-232/422/485-Ports, zwei Ethernet-Ports, acht digitale Eingangskanäle, acht digitale Ausgangskanäle, VGA-Ausgang, zwei USB-Server und einen CompactFlash-Sockel. Die Computer sind in einem kompakten, industriellen Aluminiumgehäuse untergebracht.
Der IA260-Computer verwendet die Cirrus Logic EP9315 ARM9 RISC-CPU mit 32 Bit, 200 MHz. Diese leistungsfähige Datenverarbeitungs-Engine unterstützt mehrere nützliche Kommunikationsfunktionen, erzeugt jedoch nicht viel Abwärme. Das integrierte 32 MB NOR Flash-ROM und 128 MB SDRAM bieten Ihnen ausreichend Arbeitsspeicher zur direkten Ausführung Ihrer Anwendungssoftware auf dem IA260.
Mit der integrierten VGA-Ausgabeschnittstelle eignet sich der IA260 zur Verwendung mit SCADA-Systemen in industriellen Anwendungen, wie z. B. in der Fertigungsautomatisierung, in der Überwachung von Produktionslinienverfahren und in der Bergbauautomatisierung, die VGA- und HMI-Funktionen benötigen.
Der IA260-Computer unterstützt RS-232/422/485, digitale I/Os und zwei LAN-Ports. Damit eignet sich dieses Gerät ideal als Kommunikationsplattform für industrielle Anwendungen, die Netzwerkredundanz erfordern. Neben dem Standardmodell steht auch ein Modell mit einem erweiterten Temperaturbereich (-40 bis 75 °C) zur Verfügung, sodass dieses auch in rauen industriellen Umgebungen eingesetzt werden kann.
Die Embedded IA260-Computer werden mit vorinstalliertem Standard-Linux oder mit dem gängigen WinCE OS ausgeliefert. Die für einen Desktop-PC entwickelte Software kann mit einem gängigen Compiler ganz einfach auf die IA260-Plattform portiert werden, ohne den Code zu verändern. Sie können die für eigene Anwendungen entwickelte Software im Flash-Speicher des IA260 ablegen.
Der IA260-Computer verwendet die Cirrus Logic EP9315 ARM9 RISC-CPU mit 32 Bit, 200 MHz. Diese leistungsfähige Datenverarbeitungs-Engine unterstützt mehrere nützliche Kommunikationsfunktionen, erzeugt jedoch nicht viel Abwärme. Das integrierte 32 MB NOR Flash-ROM und 128 MB SDRAM bieten Ihnen ausreichend Arbeitsspeicher zur direkten Ausführung Ihrer Anwendungssoftware auf dem IA260.
Mit der integrierten VGA-Ausgabeschnittstelle eignet sich der IA260 zur Verwendung mit SCADA-Systemen in industriellen Anwendungen, wie z. B. in der Fertigungsautomatisierung, in der Überwachung von Produktionslinienverfahren und in der Bergbauautomatisierung, die VGA- und HMI-Funktionen benötigen.
Der IA260-Computer unterstützt RS-232/422/485, digitale I/Os und zwei LAN-Ports. Damit eignet sich dieses Gerät ideal als Kommunikationsplattform für industrielle Anwendungen, die Netzwerkredundanz erfordern. Neben dem Standardmodell steht auch ein Modell mit einem erweiterten Temperaturbereich (-40 bis 75 °C) zur Verfügung, sodass dieses auch in rauen industriellen Umgebungen eingesetzt werden kann.
Die Embedded IA260-Computer werden mit vorinstalliertem Standard-Linux oder mit dem gängigen WinCE OS ausgeliefert. Die für einen Desktop-PC entwickelte Software kann mit einem gängigen Compiler ganz einfach auf die IA260-Plattform portiert werden, ohne den Code zu verändern. Sie können die für eigene Anwendungen entwickelte Software im Flash-Speicher des IA260 ablegen.
Hardware Specifications
Computer
CPU
Cirrus EP9315 ARM9 CPU, 200 MHz
OS (pre-installed)
Windows CE 6.0 or Linux
DRAM
128 MB onboard
Flash
32 MB onboard
USB
USB 2.0 compliant hosts x 2, type A connector
Storage
Storage Expansion
CompactFlash slot
Display
Graphics Controller
EP9315 internal graphics accelerator engine with TTL graphical signal support
Display Memory
Dynamic video memory (shares system memory)
Display Interface
CRT interface for VGA output, DB15 female connector
Resolution
1024 x 768, 8 bits
Ethernet Interface
LAN
2 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection
1.5 kV built-in
Serial Interface
Serial Standards
4 RS-232/422/485 ports, software-selectable (DB9 male)
ESD Protection
4 kV for all signals
Console Port
RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
Serial Communication Parameters
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate
50 bps to 921.6 kbps (supports non-standard baudrates; see user´s manual for details)
Serial Signals
RS-232
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422
TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w
TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w
Data+, Data-, GND
Digital Input
Input Channels
8, source type
Input Voltage
0 to 30 VDC
Digital Input Levels for Dry Contacts
- Logic level 0: Close to GND
- Logic level 1: Open
Digital Input Levels for Wet Contacts
- Logic level 0: +3 V max.
- Logic level 1: +10 V to +30 V (COM to DI)
Connector Type
10-pin screw terminal block (8 points, COM, GND)
Isolation
3 kV optical isolation
Digital Output
Output Channels
8, sink type
Output Current
Max. 200 mA per channel
On-state Voltage
24 VDC nominal, open collector to 30 V
Connector Type
9-pin screw terminal block
Isolation
3 kV optical isolation
LEDs
System
Power, Ready, Storage
LAN
10M/Link x 2, 100M/Link x 2 (on connector)
Serial
TxD x 4, RxD x 4
Switches and Buttons
Reset Button
Supports "Reset to Factory Default"
Physical Characteristics
Housing
Aluminum, industrial vertical form factor
Weight
1 kg
Dimensions
52 x 112.6 x 162 mm (2.05 x 4.43 x 6.38 in)
Mounting
DIN-Rail, wall
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Anti-vibration
2 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-shock
20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage
12 to 48 VDC (3-pin terminal block)
Power Consumption
With no load on USB ports: 5.8 W
- 240 mA @ 24 VDC
- 480 mA @ 12 VDC
- 450 mA @ 24 VDC
- 900 mA @ 12 VDC
Standards and Certifications
Safety
UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1, CCC (GB4943, GB9254, GB17625.1)
EMC
EN 55022 Class A, EN 61000-3-2 Class A, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class A
Green Product
RoHS, CRoHS, WEEE
Reliability
Automatic Reboot Trigger
Built-in WDT (watchdog timer)
MTBF (mean time between failures)
145,328 hrs
Note
- The Hardware Specifications apply to the embedded computer unit itself, but not to accessories. In particular, the wide temperature specification does not apply to accessories such as the power adaptor and cables.
Software Specifications
Linux
OS
Linux 2.6.23
File System
JFFS2, NFS, Ext2, Ext3
Internet Protocol Suite
TCP, UDP, IPv4, SNMPv1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE
Internet Security
OpenVPN, iptables firewall
Web Server (Apache)
Allows you to create and manage web sites
Terminal Server (SSH)
Provides secure encrypted communications between two un-trusted hosts over an insecure network
Dial-up Networking
PPP Daemon for Linux that allows Unix machines to connect to the Internet through dialup lines, using the PPP protocol, as a PPP server or client. Works with ‘chat’, ‘dip’, and ‘diald’, among (many) others. Supports IP, TCP, UDP
Watchdog
Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided)
Application Development Software
- Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API)
- GNU C/C++ cross-compiler
- GNU C library
- GDB source-level debugging server
Software Protection
Encryption tool for user executable files (based on patented Moxa technology)
Windows Embedded CE 6.0
OS
Windows Embedded CE 6.0
File System
FAT (for on-board flash)
Internet Protocol Suite
TCP, UDP, IPv4, SNMPv2, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP
Web Server (WinCE IIS)
Supports ASP, ISAPI Secure Socket Layer (SSL 2/3) and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions
Dial-up Networking
Supports RAS client API and PPP, Extensible Authentication Protocol (EAP), and RAS scripting
File Server
Enables remote clients to access files and other resources over the network
Watchdog
Features a hardware function to trigger system reset in a user specified time interval. (Moxa API provided)
Application Development Software
- Moxa WinCE 6.0 SDK
- Moxa API Library
- C Libraries and Run-times
- Component Services (COM and DCOM)
- Microsoft® .NET Compact Framework 2.0
- XML, including DOM, XQL, XPATH, XSLT, SAX, SAX2
- SOAP Toolkit Client
- Winsock 2.2
Available Modules | IA260-CE | RISC-based industrial embedded computer with 4 serial ports, 8 DI, 8 DO, dual LANs, VGA, CompactFlash, USB, Win CE 6.0 OS (standard operating temperature: -10 to 60°C) | IA260-LX | RISC-based industrial embedded computer with 4 serial ports, 8 DIs, 8 DOs, dual LANs, VGA, CompactFlash, USB, Linux OS, -10 to 60°C operating temperature | IA260-T-CE | RISC-based industrial embedded computer with 4 serial ports, 8 DI, 8 DO, dual LANs, VGA, CompactFlash, USB, Win CE 6.0 OS (standard operating temperature: -40 to 75°C) | IA260-T-LX | RISC-based industrial embedded computer with 4 serial ports, 8 DIs, 8 DOs, dual LANs, VGA, CompactFlash, USB, Linux OS, -40 to 75°C operating temperature |
Kunden, die diesen Artikel gesehen haben, sahen auch