ADDER ADDERLink INFINITY 100T VGA
ZeroU™ IP-based high performance KVM for extension/matrix of video, audio and USB over a single cable
- Zero U form factor
- IP-based: use your existing network
- USB powered
- Low power consumption
- Supports multiple video resolutions
- Easy retrofit into existing infrastructure
- Plug and play
ADDERLink™ INFINITY 100T VGA (ALIF100T) is a ZeroU™, high performance IP KVM (Keyboard, Video, Mouse) extender and/or matrix that enables the use of standard IT infrastructure to extend computers away from the user environment.
Features
- ZeroU™ size
The ADDERLink INFINITY 100T (ALIF100T)takes ZeroU™ of rack space in the server room allowing for ultimate flexibility andease of installation.
IP-based
Use your existing networking infrastructure to extend or matrix your computing resources to your users.
USB powered
The device can be powered from USB.This means there is no need to provision for an external PSU. Options for powering from an external PSU or redundant PSU are also available.
Low power consumption
Requires less than 3 watts.
Video options
The system supports resolutions up to 1920x1200 @60Hz through a VGA interface
USB1.1
Enables you to connect any USB human interface device from mouse and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers.
Seamless integration with the ADDERLink INFINITY range
The ALIF100T can integrate seamlessly into your existing ADDERLink INFINITY setup, replacing or working in conjunction with your existing ALIF endpoints.
(Refer to manual on AIM firmware requirements for a matrix installation)
Perfect digital video
The ALIF100T uses an encoding system that is spatially-lossless, with 1:1 pixel mapping, so the digital video you receive is the same as the digital video leaving the remote computer ensuring the very best picture available and color accuracy.
USB audio
The system delivers USB stereo audio (Line In, Line Out) digitally across the network.
EDID management
The system has intelligent EDID management to either allow the true characteristics of the monitor to be passed back to the computer, or controlled resolutions to be imposed.
Digital KVM matrix
Using the ADDERLink INFINITY Manager (AIM) you can turn multiple point-to-point extenders into a matrix system that allows any workstation to connect to any computer connected to the network.
See the AIM page on the Adder website for details.
Technical Specifications
- Video resolutions
- The system supports resolutions up to 1920x1200 @60Hz
- Operating temperature: 0 to 50°C/32 to 122°F
- Storage temperature: -10 to 60°C/14 to 140°F
- Storage and operating relative humidity: 10-90% non-condensing
- Altitude: <2000m
- MTBF: >500,000 hours
- USB power: 2 x USB1.1 (2 x 500mA@5v) 5W
- External power: 5VDC, 1A, (LPS)
- Typical power consumption: 3 watts
- BTU: 10.2BTU/hr
- Dimensions: (L)110mm/4.3” x (W)55mm/2.17” x (D)25mm/1” with 30cm/12” cable length
- Weight: 0.2kg/0.4lb
- Materials: ABS and aluminum construction
- Computer: 1x VGA, 2x USB Type-A
- Ethernet: 1x 8p8c (RJ45)
- Power: 2.5mm socket
- USB: USB1.1 Full and low speed (No HS support)
- USB features: Keyboard, mouse, and touch
- USB device seen as: 7 or 13 port hub
- Max video resolution: Up to 1920x1200 @60Hz
- Audio: Line in/out USB audio 2 channel 16bit 48KHz
- Ethernet: 1GbE (No 10/100 support)
- Cat5e and above
- Ethernet specifications rules apply 100m/300ft maximum run
- CE and FCC
- UKCA & ICES and cULus
- Dimensions: (L)292mm/11.5“ x (W)245mm/9.6” x (D)55mm/2.1”
- Weight: 0.5kg/1.1lb
Operating/storage conditions
Power
Physical
Connectors
Specification
Cable types recommendations
Cable length rules
Approvals / Compliance
Packing Box
Ordering Information
Product | Description |
---|---|
ALIF100T-VGA: | ADDERLink INFINITY TX with VGA connector |
Accessories (Sold separately) | |
PSU-IEC-5VDC-2.5A: | IEC power supply |
PSU-RED-RPS: | 12v to 5v converter |
DVA: | VGA to DVI converter |
What’s in the Box?
- 1x ALIF100T unit
- 1x Quick start guide
Kunden, die diesen Artikel gesehen haben, sahen auch