Perle TRIO-PS / 600DC/24DC/20 DIN Rail Power Supply
DC to DC Converter for Frequency or Power Inverter
- 24V DC Output Voltage
- 20 Amps Output
- 480 Watts Output
- Input Voltage Range: 450 to 840 V DC
Die TRIO-PS/600DC/24DC/20 Stromversorgung wurde speziell für den Anschluss an hohe Eingangsspannungen wie Frequenzumrichter entwickelt. Sie ist perfekt geeignet für den Anschluss an 600-V DC-Zwischenkreise von Frequenzumrichtern. Im Falle eines Netzausfalls werden die angeschlossenen 24-V-Lasten ohne Unterbrechung über die kinetische Energie des Motors versorgt.
Verstellbarer Ausgangsspannungsbereich von 22.5 bis 29.5 V DC
Mithilfe eines Drehpotentiometers an der Vorderseite der TRIO Stromversorgung kann die Ausgangsspannung optimal auf Anforderungen der jeweiligen Anwendung angepasst werden. So können Sie sie zum Beispiel ganz einfach anpassen, um den von einem langen Kabel verursachten Spannungsabfall auszugleichen.
POWER BOOST: zuverlässiger Start von schwierigen Lastens
Bei der Konfiguration, Optimierung und Erweiterung von großen Systemen ist viel Flexibilität gefragt. Eine Leistungsreserve in der Stromversorgungseinheit ist wichtig, um ein System oder eine Maschine optimal an Ihre Anforderungen anzupassen. Mit der TRIO Power-Boost-Funktion liefert ein statischer Boost kontinuierlich bis zu 125% des Nennstroms. Das ist dann nützlich, wenn nicht vorhergesagt werden kann, welche Lasten zur gleichen Zeit eingeschaltet werden, oder wenn hohe Einschaltströme von kapazitiven Lasten ohne Spannungsabsenkungen absorbiert werden müssen.
Präventive Funktionsüberwachung meldet kritische Betriebszustände, bevor sie auftreten
Mit einer TRIO Stromversorgung werden die Ausgangsspannung und der Ausgangsstrom ständig überwacht. Die präventive Funktionsüberwachung visualisiert kritische Betriebszustände an und zeigt sie dem Controller folgendermaßen sowohl lokal als auch auf Entfernung an:
- Über LED
- Über potentialfreien Relaiskontakt
- Über aktiven Schaltausgang
Industrielle Betriebstemperatur von -25°C bis +70°C
Geräte in den Bereichen Verkehrsmanagement, Öl- und Gaspipelines, Wetterverfolgung, industrielle und Outdoor-Anwendungen müssen bei Temperaturen funktionsfähig bleiben, die von kommerziellen Stromversorgungen nicht getragen werden. Bei einer Betriebstemperatur von -25°C bis +70°C ist die TRIO Stromversorgung ideal für Geräte, die rauen Umgebungen und extremen Temperaturen ausgesetzt sind.
Hohe Effizienz und niedrige Leistungsaufnahme bei Nulllast
Im Vergleich zu anderen Produkten auf dem Markt bietet die TRIO Stromversorgung hervorragende Energieeinsparungen. Dank der sehr niedrigen Leistungsaufnahme bei Nulllast und hoher Effizienz bei Nennlast wird nur eine geringe Menge an elektrischer Energie in unerwünschte Wärmeenergie umgewandelt, wodurch diese Stromversorgungen besonders umweltfreundlich sind.
Ideale Anwendungsumgebungen für TRIO Schaltnetzteile für Hutschienenmontage:
- Hutschienen: EN 50121-4 Bahnzulassung
- Maschinenbau
- Automatisierter Produktionsablauf
- Industriesteuerung, Automatisierung, Montage und Prüfgeräte
- Baukontrolle, Sicherheit und Überwachung und Klimaanlagen.
- Stromversorgung von vielen Industrieautomatisierungsgeräten wie Sensoren, Controllern und Ventilen
Weitere Gründe sich für TRIO DC/DC-Wandler u entscheiden:
- Kompakte Pufferlösung
- Schnelle Auslösung von klassischen Leistungsschaltern
- Spannungsisolierung Eingang/Ausgang: 4 kV-AC
- Schutzvorkehrungen: Kurzschluss, Überlast, Überspannung, Übertemperatur
Environmental Product Compliance | |
---|---|
China RoHS | Environmentally Friendly Use Period = 25; |
General | |
Net weight | 2 kg |
Efficiency | > 91 % (With 600 V DC and nominal values) |
Insulation voltage input/output | 4 kV AC (type test) |
2 kV AC (routine test) | |
Insulation voltage input / PE | 2 kV AC (type test) |
2 kV AC (routine test) | |
Insulation voltage output / PE | 500 V DC (routine test) |
Protection class | I (with PE connection) |
Degree of protection | IP20 |
MTBF (IEC 61709, SN 29500) | |
> 701000 h (40 °C) | |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Assembly instructions | alignable: horizontally 0 mm, vertically 50 mm |
Standards and Regulations | |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise immunity | EN 61000-6-2:2005 |
Connection in acc. with standard | CUL |
Standards/regulations | EN 61000-4-2 |
Contact discharge | 4 kV (Test Level 2) |
Standards/regulations | EN 61000-4-3 |
Frequency range | 80 MHz ... 3 GHz |
Test field strength | 10 V/m |
Frequency range | 1.4 GHz ... 2 GHz |
Test field strength | 3 V/m |
Standards/regulations | EN 61000-4-4 |
Comments | Criterion B |
Standards/regulations | EN 61000-6-3 |
EN 61000-4-6 | |
Frequency range | 150 kHz ... 80 MHz |
Voltage | 10 V (Test Level 3) |
Standards/regulations | EN 61000-4-11 |
Low Voltage Directive | Conformance with LV directive 2006/95/EC |
Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
Standard – Safety extra-low voltage | EN 60950-1 (SELV) |
EN 60204 (PELV) | |
Standard - Safe isolation | DIN VDE 0100-410 |
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment | EN 50178 |
Standard – Limitation of mains harmonic currents | EN 61000-3-2 |
UL approvals | UL/C-UL listed UL 508 |
UL/C-UL Recognized UL 60950-1 | |
Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz ... 150 Hz, 2.3g, 90 min. | |
Rail applications | EN 50121-4 |
Connection data, input | |
Connection method | Screw connection |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 9 mm |
Screw thread | M2,5 |
Output data | |
Nominal output voltage | 24 V DC ±1 % |
Setting range of the output voltage (USet) | 22.5 V DC ... 29.5 V DC (UIN > 475 V DC) |
22.5 V DC ... 28 V DC (UIN ≤ 475 V DC) | |
Nominal output current (IN) | 20 A (-25 °C ... 55 °C) |
Derating | 55 °C ... 70 °C (2.5%/K) |
Connection in parallel | Yes, for redundancy and increased capacity |
Connection in series | yes |
Feedback resistance | 35 V DC |
Protection against surge voltage on the output | Yes, < 35 V DC |
Max. capacitive load | Unlimited |
Active current limitation | Approx. 25 A (for short-circuit) |
Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
< 2 % (change in load, dynamic 10 % ... 90 %) | |
< 0.1 % (change in input voltage ±10 %) | |
Residual ripple | < 40 mVPP |
Output power | 480 W |
Typical response time | < 1 s |
Peak switching voltages nominal load | < 10 mVPP |
Maximum power dissipation in no-load condition | 3.8 W |
Power loss nominal load max. | 45 W |
Dimensions | |
Width | 115 mm |
Height | 130 mm |
Depth | 152.5 mm |
Weight per piece | 1780.0 GRM |
Input data | |
Nominal input voltage range | 600 V DC |
Input voltage range | 450 V DC ... 840 V DC (Dielectric strength up to 900 V DC) |
Frequency range DC | 0 Hz |
Discharge current to PE | < 3.5 mA |
Current consumption | 0.9 A (600 V DC) |
Nominal power consumption | 527.3 VA |
Inrush surge current | < 26 A |
Mains buffering | typ. 15 ms (600 V DC) |
Choice of suitable circuit breakers | 4 A ... 6 A (1000 V DC) |
Power factor (cos phi) | 1 |
Type of protection | Transient surge protection |
Protective circuit/component | Varistor |
Connection data, onput | |
Connection method | Screw connection |
Conductor cross section solid min. | 0.5 mm² |
Conductor cross section solid max. | 6 mm² |
Conductor cross section flexible min. | 0.5 mm² |
Conductor cross section flexible max. | 4 mm² |
Conductor cross section AWG min. | 12 |
Conductor cross section AWG max. | 10 |
Stripping length | 14 mm |
Screw thread | M3 |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C ... 70 °C (> 55° C derating : 2.5%/K) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
Climatic class | 3K3 (in acc. with EN 60721) |
Degree of pollution | 2 |
Approvals | |
|
Ordering Information
- TRIO-PS/600DC/24DC/20 Power Supply
- - TRIO DC/DC converter for DIN rail mounting,
1-phase,
input: 600 V DC,
output: 24 V DC/20 A