Perle UNO-PS /350-900DC/24DC/60W DIN Rail Power Supply
Regulated DC to DC Converter
- 24V DC Output Voltage
- 2.5 Amps
- 60 Watts
- Input Voltage Range: 300 V DC ... 1000 V DC
Wenn Sie aus einer Quelle, die unter Umständen nicht gut kontrolliert ist, eine regulierte 24-V-DC-Ausgangsspannung an eine unter Umständen nicht konstante Last effizient herstellen möchten, ist die UNO-PS/350-900DC/24DC/60W Stromversorgung die richtige Wahl für Sie. Dieser DC/DC-Wandler ermöglicht den direkten Anschluss von Strangspannungen von bis zu 1000 V DC. Das bedeutet, dass der Anschlusskasten direkt von der Photovoltaikanlage versorgt wird und keine zusätzlichen Installationskosten anfallen. In einer weiteren Erweiterungsstufe kann die Signalleitung mit einem drahtlosen Anschluss ersetzt werden. Die UNO Stromversorgung verfügt über alle zur Unterstützung von ITE (informationstechnische Geräte) erforderlichen Sicherheitszertifikate, eine robuste Verpackung, erweiterte Betriebstemperaturbereiche, hohe Spitzenlasten und hohe Isolationsspannungen und kann dadurch die Anforderungen Ihrer industriellen Anwendung erfüllen.
Industrielle Betriebstemperatur von -25°C bis +70°C
Geräte in den Bereichen Verkehrsmanagement, Öl- und Gaspipelines, Wetterverfolgung, industrielle und Outdoor-Anwendungen müssen bei Temperaturen funktionsfähig bleiben, die von kommerziellen Stromversorgungen nicht getragen werden. Bei einer Betriebstemperatur von -25°C bis +70°C und einer zuverlässigen Inbetriebnahme des Geräts bei -40°C ist die UNO Stromversorgung ideal für Geräte, die rauen Umgebungen und extremen Temperaturen ausgesetzt sind.
Hohe Effizienz bis 90 % und niedrige Leistungsaufnahme bei Nulllast
Im Vergleich zu anderen Produkten auf dem Markt bietet die UNO Stromversorgung hervorragende Energieeinsparungen. Dank der sehr niedrigen Leistungsaufnahme bei Nulllast und 90% Effizienz bei Nennlast wird nur eine geringe Menge an elektrischer Energie in unerwünschte Wärmeenergie umgewandelt, wodurch diese Stromversorgung besonders umweltfreundlich ist.
Ideale Anwendungsumgebung für UNO DC/DC-Wandler:
- Versorgen Sie Ihren Schaltschrank direkt über das Photovoltaiksystem, um so Installationskosten zu sparen und die Systemeffizienz zu erhöhen.
- Wenn kein AC-Anschluss verfügbar und direkte Feldinstallation erforderlich ist.
Weitere Gründe sich für einen UNO DC/DC-Wandler zu entscheiden:
- Zertifizierung UL 1741 vereinfacht Zulassung des gesamten Systems
- LED-Funktionsüberwachung vereinfacht Inbetriebnahme
- Geringer Raumbedarf im Schaltkasten
- Hochspannungsisolation-Eingangs-/Ausgangswert von 8 kV
- Schutzvorkehrungen: Kurzschluss, Überlast, Überspannung, Übertemperatur
- Hohe MTBF (mittlerer Ausfallabstand)-Werte gewährleisten maximale Verfügbarkeit
Environmental Product Compliance | |
---|---|
REACH SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 25; |
General | |
Net weight | 0.3 kg |
Efficiency | > 90 % |
Insulation voltage input/output | 8 kV DC (type test) |
3 kV DC (routine test) | |
Protection class | II |
Degree of protection | IP20 |
MTBF (IEC 61709, SN 29500) | > 1160000 h (40 °C) |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Assembly instructions | alignable: 0 mm horizontally, 30 mm vertically |
Standards and Regulations | |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise immunity | EN 61000-6-2:2005 |
Standards/regulations | EN 61000-4-2 |
Contact discharge | 4 kV (Test Level 3) |
Standards/regulations | EN 61000-4-3 |
Frequency range | 80 MHz ... 1 GHz |
Test field strength | 10 V/m |
Frequency range | 1.4 GHz ... 2 GHz |
Test field strength | 3 V/m |
Standards/regulations | EN 61000-4-4 |
Comments | Criterion B |
Standards/regulations | EN 61000-6-3 |
EN 61000-4-6 | |
Frequency range | 10 kHz ... 80 MHz |
Voltage | 10 V (Test Level 3) |
Standards/regulations | EN 61000-4-11 |
Low Voltage Directive | Conformance with LV directive 2006/95/EC |
Standard - | IEC 62109-1 |
Standard - Electrical safety | IEC 62109-1 |
Standard – Safety extra-low voltage | IEC 60950-1 (SELV) and EN 60204-1 (PELV) |
Standard - Safe isolation | DIN VDE 0100-410 |
Standard – Limitation of mains harmonic currents | EN 61000-3-2 |
UL approvals | UL 1741 |
Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz ... 150 Hz, 2.3g, 90 min. | |
Approval - requirement of the semiconductor industry with regard to mains voltage dips | EN 61000-4-11 |
Information technology equipment - safety (CB scheme) | CB Scheme |
Overvoltage category (IEC 62109-1) | II |
Connection data, input | |
Connection method | Screw connection |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 8 mm |
Screw thread | M3 |
Output data | |
Nominal output voltage | 24 V DC ±1 % |
Nominal output current (IN) | 2.5 A (-25 °C ... 55 °C) |
Derating | 55 °C ... 70 °C (2.5%/K) |
Connection in parallel | Yes, for redundancy and increased capacity |
Connection in series | No |
Feedback resistance | < 35 V DC |
Protection against surge voltage on the output | ≤ 35 V DC |
Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) | |
< 0.1 % (change in input voltage ±10 %) | |
Residual ripple | < 20 mVPP (with nominal values) |
Output power | 60 W |
Typical response time | < 1 s |
Maximum power dissipation in no-load condition | < 0.5 W |
Power loss nominal load max. | < 6.5 W |
Dimensions | |
Width | 55 mm |
Height | 90 mm |
Depth | 84 mm |
Weight per piece | 316.9 GRM |
Input data | |
Nominal input voltage range | 350 V DC ... 900 V DC |
Input voltage range | 300 V DC ... 1000 V DC |
Dielectric strength maximum | ≤ 1050 V DC |
Current consumption | 0.19 A (350 V DC) |
0.07 A (1000 V DC) | |
Inrush surge current | < 1 A (typical) |
Choice of suitable circuit breakers | 1 A (Characteristic gPV or comparable) |
Connection data, onput | |
Connection method | Screw connection |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 8 mm |
Screw thread | M3 |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C ... 70 °C (> 55° C derating : 2.5%/K) |
Ambient temperature (start-up type tested) | -40 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
Climatic class | 3K3 (in acc. with EN 60721) |
Degree of pollution | 2 |
Approvals | |
|
Ordering Information
- UNO-PS/350-900DC/24DC/60W Power Supply
- UNO DC/DC converter with wide range input, for DIN rail mounting, input: 350 ... 900 V DC, output: 24 V DC/60 W