MOXA MGate 5114 Series

SPHINX in Europa
DE
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Gateways > MOXA MGate 5114 Series

MOXA MGate 5114 Series

1-port Modbus RTU/ASCII/TCP/IEC 101-to-IEC 104 gateways

MOXA MGate 5114 Series
6618_21894.png
6618_21895.jpg
6618_21896.jpg
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104
  • Supports IEC 60870-5-101 master/slave (balanced/unbalanced)
  • Supports IEC 60870-5-104 client/server
  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Effortless configuration via web-based wizard
  • Status monitoring and fault protection for easy maintenance
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting
  • microSD card for configuration backup/duplication and event logs
  • Built-in Ethernet cascading for easy wiring
  • Redundant dual DC power inputs and relay output
  • -40 to 75°C wide operating temperature models available
  • Serial port with 2 kV isolation protection
  • Security features based on IEC 62443

The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.


Easy Configuration via Web Console

The MGate 5114 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps.


Modbus RTU/ASCII/TCP Protocol Traffic Monitor

MGate 5114 Series gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. It is worth mentioning that traffic logs can be viewed in the popular troubleshooting tool, Wireshark. With this feature, you can easily analyze traffic to determine the root cause of a problem.


Maintenance Functions

MGate 5114 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PSCADA system when a device gets disconnected or does not respond, in which case the PSCADA system gets the status of each end device and then issues alarms to notify operators.
ProdGrafik

Specification



    Ethernet Interface

      10/100BaseT(X) Ports (RJ45 connector)
      2
      Auto MDI/MDI-X connection

      Magnetic Isolation Protection
      1.5 kV (built-in)



    Ethernet Software Features

      Industrial Protocols
      Modbus TCP Client (Master), Modbus TCP Server (Slave), IEC 60870-5-104 Client (Master), IEC 60870-5-104 Server (Slave)

      Configuration Options
      Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console

      Management
      ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client

      MIB
      RFC1213, RFC1317

      Time Management
      NTP Client



    Serial Interface

      Console Port
      RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

      No. of Ports
      1

      Connector
      DB9 male

      Serial Standards
      RS-232/422/485

      Baudrate
      50 bps to 921.6 kbps

      Data Bits
      7, 8

      Parity
      Even, Mark, None, Odd, Space

      Stop Bits
      1, 2

      Flow Control
      RTS Toggle (RS-232 only), RTS/CTS

      RS-485 Data Direction Control
      ADDC® (automatic data direction control)

      Pull High/Low Resistor for RS-485
      1 kilo-ohm, 150 kilo-ohms

      Terminator for RS-485
      120 ohms

      Isolation
      2 kV (built-in)



    Serial Signals

      RS-232
      TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

      RS-422
      Tx+, Tx-, Rx+, Rx-, GND

      RS-485-2w
      Data+, Data-, GND

      RS-485-4w
      Tx+, Tx-, Rx+, Rx-, GND



    Serial Software Features

      Industrial Protocols
      Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, IEC 60870-5-101 Master (Balanced/Unbalanced), IEC 60870-5-101 Slave (Balanced/Unbalanced)

      Configuration Options
      Serial Console



    ModbusRTU/ASCII

      Mode
      Master, Slave

      Functions Supported
      1, 2, 3, 4, 5, 6, 15, 16, 23

      Max. No. of Commands
      128



    ModbusTCP

      Mode
      Client, Server

      Functions Supported
      1, 2, 3, 4, 5, 6, 15, 16, 23

      Max. No. of Client Connections
      32

      Max. No. of Server Connections
      32

      Max. No. of Commands
      128



    IEC 60870-5-104

      Mode
      Client (Master)
      Server (Slave)

      Max. No. of Client Connections
      32

      Max. No. of Server Connections
      32

      Max. No. of Information Objects
      2000 points



    IEC 60870-5-101

      Mode
      Master (Balanced/Unbalanced)
      Slave (Balanced/Unbalanced)

      Max. No. of Master Connections
      1

      Max. No. of Slave Connections
      1 (Balanced), 31 (Unbalanced)

      Max. No. of Information Objects
      2000 points



    Memory

      microSD Slot
      Up to 32 GB (SD 2.0 compatible)



    PowerParameters

      Input Voltage
      12 to 48 VDC

      Input Current
      455 mA @ 12 VDC

      Power Connector
      Screw-fastened Euroblock terminal



    Relays

      Contact Current Rating
      Resistive load: 2 A @ 30 VDC



    PhysicalCharacteristics

      Housing
      Metal

      IP Rating
      IP30

      Dimensions
      36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)

      Weight
      507 g (1.12 lb)



    EnvironmentalLimits

      Storage Temperature (package included)
      -40 to 85°C (-40 to 185°F)

      Ambient Relative Humidity
      5 to 95% (non-condensing)

      Operating Temperature
      MGate 5114: 0 to 60°C (32 to 140°F)
      MGate 5114-T: -40 to 75°C (-40 to 167°F)



    Standardsand Certifications

      Safety
      EN 60950-1, UL 508

      EMC
      EN 55032/24

      EMI
      CISPR 32, FCC Part 15B Class B

      EMS
      IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
      IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
      IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
      IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
      IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
      IEC 61000-4-8 PFMF

      Hazardous Locations
      ATEX, Class I Division 2, IECEx Class 1 Division 2, ATEX, and IECEx certifications are underway.
      Please contact us for details.

      Freefall
      IEC 60068-2-32

      Shock
      IEC 60068-2-27

      Vibration
      IEC 60068-2-6, IEC 60068-2-64



    MTBF

      Time
      1,140,815 hrs

      Standards
      Telcordia SR332



Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.