HW group Relay Output 1W-UNI

Expander with 4x External Relay output allows us to connect relay outputs to Ares 12. External Relays DO can be remotely controlled.
Relay output 1W-UNI for Ares allows manual external system switching via SMS or SensDesk application. any contact can be switched automatically upon alarm detected by sensor, connected to Ares unit. Output can be used as the thermostat, automatic switch of backup units, optical or acoustic alarms, etc.

The Relay output expander reduces energy consumption of the module by using low-power bistable relays. It is not suitable for mobile apps. The time refreshing period of switches is 3s.



Applications and usage:

4x relay output expansion module for Ares 12 for remote control of appliances like for instance:
• optical and acoustical alarms
• air condition or heating systems
• power back-ups etc.

Technical specifications

Bus
Type	1-Wire UNI
Supports	Ares 12, Ares 14
Sensor positions	The Relay output 1W-UNI module always uses 4 sensor positions from the 1-Wire UNI bus limit,    i.e. even when only 2 DO are in use, the unit blocks 4 positions.
Connector	2× RJ11 (bus input + output for another sensor)
Power supply	The module is powered via RJ11, in some cases external 5V power supply can be necessary.
Power limits	To one active port (RJ11 connector of the Ares device) maximum of 2 Relay output 1W-UNI can be connected.      To strengthen the power supply an external 5V adapter or a powered “1-Wire hub Power” accessory can be used.
Max. distance	60 m (from an active port of Ares device)
Included accessory	3m 2× RJ11 cable
4× relay output
Port	OUT1 – OUT4
Type	Switchable relay dry contact (NO/NC)
Load Max	50 V / 1 A AC/DC
Galvanic insulation	The outputs are galvanically insulated
Physical parameters
Operating conditions	-40 to +85 °C / 5 to 90 % relative humidity
Dimensions	65 × 80 × 30 mm
Weight	70 g

Strengthening the power supply
One active RJ11 port can supply maximum of two Relay output 1W-UNI modules.
The third unit therefore uses its own power supply adapter.


Hub to strengthen the power supply
Active 1-Wire port from Ares 12 or Ares 14 unit is connected to several ports via “1-Wire hub Power” accessory.
All ports of the “1-Wire hub Power” are powered by a 12V power supply adapter.




Relay Output 1W-UNI Industrial

With metal housing